The Building & Codes Department conducts inspections at key stages of construction to verify compliance with safety standards, adopted building codes, and approved plans. On this page you’ll find the most common inspection phases, how to schedule (and reschedule), and what our inspectors expect to see on site so your project stays safe, compliant, and on schedule.
Common Inspection Phases
Your permit or approved plans may specify additional inspections.
When in doubt, ask us before you pour or cover.
Footing/Foundation
Before concrete is poured, inspectors verify the depth, width, and reinforcement of the footing or foundation to meet code requirements.
Framing/Sheathing
Checks structural framing, sheathing, and connections to ensure the building’s framework meets design and safety standards.
Rough-In Inspections
Includes plumbing, electrical, and mechanical systems before walls are closed. Ensures compliance with safety and installation codes.
Insulation/Energy
Verifies insulation type, R-values, and energy code compliance before drywall installation.
Final Inspection
Confirms all work is completed to code, safety measures are in place, and the project is ready for a Certificate of Occupancy.
Other Inspections
Slab prep, masonry, roofing, lath, stucco; fire sprinklers/alarms (commercial); and special inspections per engineered plans.
How to Schedule an Inspection
- Have your permit number and project address ready.
- Confirm the stage of construction is ready for inspection.
- Call the Building & Codes Department or submit a request through the online portal.
- Request inspections at least 24–48 hours in advance.
Contact
Expectations On Site
At Every Inspection
- Permit and approved plans on site
- Address posted and visible from street
- Safe, clear access to all areas
- Responsible party on site or reachable
Before We Arrive
- Work 100% complete for that phase
- All required tests on and documented
- Utilities energized as needed
- Jobsite clean and free of hazards
Helpful Links
- Fee Schedule (PDF)
- Residential Inspection Checklist (PDF)
- Commercial Inspection Checklist (PDF)
- Adopted Codes & Standards
Pro Tips
- Book next-day inspections before 3:00 PM.
- Don't backfill or cover until you pass.
- Label panels, valves, and test points.